|Rubbish Recycling Waste Container Mini Bin Skip Tipper|
Mild steel , in China we usually use Q235, which similar to grade 250 in Australia, we can also use Q345 which similar to grade 350 in Australia.
This gives you amazing value through greatly increased product life.
Thickness of plates used
|3mm M/S plate for sides and 4mm M/S for floor. Thicker plates are available based on your requirements.|
1) RHS 100*50*4 are used for top rails, and top edge of plate continuous welded to RHS
2) one piece forged lifting lugs
3) 8mm or 10mm flat bar welded on the sides
4) Crossmembers under floor
5) Straight or curve bottom design
6) Four drain holes in floor close to four corner
7) Fully welded inside and outside
3) Lifting eyes on top
4) Bottom Channels
5) A door
6) Lifting lugs
We will paint each bin you order in your company colours, enhancing your company image with great looking bins.
Two times of primer + two times of top coat
Primer : zinc-based epoxy (Grey)
Top coat : Urethane (Any color)
Packing Details: No packing , loaded in shipping container.(Usually we stack your bins with foam to protect your painting , also we can provide some paint with the bins for fixing when you got the bins)
Delivery Details: Shipped in 30 days after payment. (Usually we need 30% as deposit, and balanced will be paid after sending you the scanned copy of documents like B/L, Invoice packing list and so on)
1 Q: Are you a factory or trading company?
A: We are a factory with exporting license.
2 Q: Where is your factory located? How can I visit it?
A: Our factory is located in Yangzhou City, Jangsu Province, China, which is about 350 kms far from Shanghai. You can take the train from Shanghai to ZhenJiang, we can pick you up there. And there are other ways to come to our company, we can talk more talk if you can contact us. In one word, we can do more to make it easier to visit us.
3 Q: What does your factory do regarding quality control?
A: 1) All raw material we used are environmental-friendly;
2) Skilled workers are used in crucial production process
3) Quality Control Department will check all process like raw material, cutting sizes, parts welding, fully welding and the finished products to make sure they can meet the quality.
4 Q: What service can I get from Hero Equipment (Yangzhou ) Co.,Ltd ?
A: 1) Quick responses with full attention within 24 hours.
2) Customized bins are accepted.
3) Updated production status
4) Short delivery time: some orders can be finished within 15 days, but usually within 30 days.
5) Service before and after sales.
5 Q: Can you design for us?
A: Yes, we can. We have our Tech Dpt.. We can customized design and produce the bins as per customer's requirement.
6 Q: What is your terms of payment?
A: Usually we need 30% as deposit, and balanced will be paid after sending you the scanned copy of documents like B/L, Invoice packing list and so on.
Welcome to visit our factory in China! Now we have set our reception in Shanghai, and I will pick you up and accompany since Pudong Airport.
Please contact me if you have any questions.